Autor: Firma ANDANTA

lnGaAs Direct SWIR VIEWer (DIRVIEW)

lnGaAs Direct SWIR VIEWer (DIRVIEW)

The new DIRVIEW converter transforms Short Wave Infrared (SWIR) light from the wavelength range 900 nm – 1.7 μm into green, visible light.

The converter integrates an Indium-Gallium-Arsenide (InGaAs) photodiode array as a near-infrared detector with a special circuit to drive a green-emitting LED-array with the same pixel size and resolution as the detector array.

Thus, SWIR scenes can be easily examined with the naked eye or read in with a "normal" silicon-based camera, which has a maximum of the relative spectral sensitivity in the green spectral range.

The detection sensitivity of the DIRVIEW converter is currently ≤ 100 μW / mm2 irradiance at a conversion efficiency of ≤ 3% W / W from the near-infrared to the visible light. For lower light object scenes the use of a sensitive camera may be in certain circumstances be recommended to record the green LED intensity distribution. Also the response time of the converter is short and is in the range of at least a few hundred MHz to> 1 GHz.

The default local resolution of the DIRVIEW converter is 320 x 320 or 1280 x 960 pixels (resolution detector array = resolution emitter array) with a pixel size of only 10 μm , resulting in a recording and emission area of only 3.2 x 3.2 mm2 or 12 , 8 x 9.6 mm2 . Deviating DIRVIEW resolutions can be customized.

The operating voltage amounts typically to only 3V at a low power consumption, so that the converter is also suitable for mobile applications with battery operation. For best LED beam distribution and pixel availability, we recommend a slightly higher operating voltage of optimal and maximum 6V, with increased power consumption.

Small and lightweight 8LCC or 12LCC ceramic packages with dimensions of 8 x 8 x 1.15 mm3  or 18 x 18 x 1.45 mm3 are standardly used as housings for the DIRVIEW converter.

Possible applications include fiber optic testing, laser beam analysis, microscopy, solar cell inspection, fire detection, high-speed SWIR imaging, and many more.

Über die ANDANTA GmbH

For further information please visit ANDANTA at LASER World of PHOTONICS 2019, Hall B3, Lounge „Made in Germany“ Booth 327/5, or visit ANDANTA’s website at www.andanta.de.

ANDANTA
Special image sensors for scientific applications. InGaAs-CMOS-Hybride, Si-CCD + CMOS – wissenschaftlich/scientific, Custom Si-TDI Komponenten/Components

Firmenkontakt und Herausgeber der Meldung:

ANDANTA GmbH
Ilzweg 7+9
82140 Olching
Telefon: +49 (8142) 41058-0
http://www.andanta.de

Ansprechpartner:
Nadia Sotiriou
PR
Telefon: +49 (8142) 41058-0
E-Mail: Nadia.Sotiriou@andanta.de
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien. Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber.